Products link
  Spectrophotometers
  Microplate Instruments
 
  Thin-Film Measurement
 
 
 
  Light Sources
  Opto-mechanics 

Address
Lambda Scientific Pty Ltd
2/147 Buxton Street, North Adelaide,
SA 5006 Australia

Tel. +61 8 8267-2686
Fax. +61 8 8267-2689
Email: sales@lambdasci.com

 
 

 

 
      
LEOK-3
          
Optics Experiment Kit
     
LEOK-3
         
 Download Brochure  >>   
Features    
26 fundamental experiments  
Cost effective solution   
Comprehensive document  
Easy alignment 
      
Introduction    

The LEOK-3 Optics Experiment Kit is developed for general physics education in universities and colleges. It provides a complete set of optical and mechanical components as well as light sources. Almost all optics experiments required in general physics education (e.g. geometrical, physical, and modern optics) can be constructed in sequence using these components. Through selecting and assembling corresponding components into the setups by students themselves, their experimental skills and problem solving ability can be greatly enhanced.
The instruction manual contains comprehensive materials including experiment setup, principle, procedures and required parts with photos. 
LEOK-3 can be used to construct a total of 26 different experiments which can be grouped in six categories:
Lens Measurements: Understanding and verifying lens equation and optical rays transform.
Optical Instruments: Understanding the working principle and operation method of common lab optical instruments.
Interference Phenomena: Understanding interference theory, observing various interference patterns generated by different sources, and grasping one precise measurement method based on optical interference. 
Diffraction Phenomena: Understanding diffraction effects, observing various diffraction patterns generated by different apertures. 
Analysis of Polarization: Understanding polarization and verifying types of polarized light.
Fourier Optics and Holography: Understanding principles of advanced optics and their applications.

               
Parts List (a few parts- for full list see brochure)   
Iris Diaphragm (LEPO-16)
0-14mm adjustable
3-D Adjustable Holder (LEPO-17)
One axis translation (10mm ) and two-axis tiltable
Plate Holder B ( LEPO-19 )
With two directions tiltable
Loading Table ( LEPO-21 )
Aperture Adjustable Bar Clamp ( LEPO-20 ) 30-50mm,with two tiltable directions, for mounting tube-type components  
Multi-Pinhole Disc Assembly ( LEPO-24 )
φ0.10,0.15,0.20,0.30,0.50,0.60,1.00,2.00mm
Single-Side Adjustable Slit ( LEPO-28 )
Slit width 0-2mm,slit direction tiltable within ±5°
Lens Group Holder ( LEPO-29 )
Movable on rail for nodal measurement
Double Right Angle Prisms Assembly (LEPO-31)
For inverting image in two directions
Ruler ( LEPO-34 )
It is used for experiment for measuring telescope's magnification
DMM Holder (LEPO-37 )
Measurement Microscope
Newton Ring Assembly ( LEPO-38 )
    
      
  Top >>